1735 PowerFill Pro – 1-Gallon Pressure Fluid Dispenser
1735 PowerFill Pro – 1-Gallon Fluid Transfer Pump & Pressure Dispenser
The Motive Products 1735 PowerFill Pro is the professional shop standard for pressurized fluid transfer. A USA-made ball valve delivers snap-shut, drip-free control at the hose end; the integrated Schrader valve pressurizes the 1-gallon translucent tank in seconds without shop air; and the stainless quick-connect snaps to Motive NPT adapters for direct fill-plug service on transmissions, differentials, transfer cases, and cooling systems. This listing is for the tank-only configuration — no adapters included.
Key Features
- 1-Gallon Translucent Tank — ample capacity for single-vehicle service; see fill level without guessing.
- Schrader Valve — pressurize to operating pressure or release safely using any standard tire inflator; no hand pumping.
- Stainless Quick-Connect — mates directly with Motive NPT adapters, pre-lube adapters, and PowerFill adapters; swap adapters tool-free.
- Chemical-Resistant Seals — safe with synthetic and conventional engine oil, ATF, gear lube, and coolant.
Recommended Applications
- Manual transmission and differential gear-oil fills — no more squeeze bottles or hand pumps
- Automatic transmission fluid service via drain-plug or fill-plug adapters
- Transfer-case and limited-slip diff service on trucks and SUVs
- Coolant refills and hydraulic clutch reservoir top-offs
- Engine pre-lube when paired with Motive NPT pre-lube adapters (sold separately)
Which Motive Fluid Transfer Pump Is Right for You?
Motive builds three fluid-handling systems. Pick by job direction and capacity:
| Model | Best for | Capacity | Direction | Pressurization |
|---|---|---|---|---|
| 1735 PowerFill Pro (this product) | Filling gearboxes, diffs & transfer cases on a single vehicle | 1 gallon | Dispenses (pushes fluid in) | Schrader valve – any tire inflator |
| 1745 PowerFill Pro | Multi-vehicle shops & fleet bays; fewer refills | 2 gallons | Dispenses (pushes fluid in) | Hand pump with 0–30 psi gauge |
| 1702 Power Extractor | Removing oil, ATF & brake fluid topside — no lift needed | 2 gallons | Extracts (pulls fluid out) | Manual vacuum pump |
If you need to remove old fluid before refilling, pair the 1735 with the 1702 Power Extractor for a complete drain-and-fill workflow without crawling under the vehicle.
Specifications
- Tank capacity: 1 US gallon (4 quarts), translucent for visible fluid level
- Shutoff: USA-made ball valve at hose end — zero-drip control
- Pressurization: Schrader valve (compressor or hand tire pump)
- Seals: chemical-resistant; compatible with synthetic/conventional oil, ATF, gear lube, coolant
- Connection: stainless quick-connect for Motive NPT and PowerFill adapters (SKUs 1188, 1138, 1144, 1140, 1190)
What's Included
1735 PowerFill Pro 1-gallon tank with ball valve, Schrader valve, quick-connect hose assembly, and wide-mouth filler cap with strainer. Adapters and pre-lube fittings sold separately — see Motive Products SKUs 1188, 1138, 1144, 1140, and 1190. Full directions: PowerFill instructions.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
Product Information
Product Information
Shipping & Returns
Shipping & Returns
1735 PowerFill Pro – 1-Gallon Pressure Fluid Dispenser
1735 PowerFill Pro – 1-Gallon Pressure Fluid Dispenser
1735 PowerFill Pro – 1-Gallon Fluid Transfer Pump & Pressure Dispenser
The Motive Products 1735 PowerFill Pro is the professional shop standard for pressurized fluid transfer. A USA-made ball valve delivers snap-shut, drip-free control at the hose end; the integrated Schrader valve pressurizes the 1-gallon translucent tank in seconds without shop air; and the stainless quick-connect snaps to Motive NPT adapters for direct fill-plug service on transmissions, differentials, transfer cases, and cooling systems. This listing is for the tank-only configuration — no adapters included.
Key Features
- 1-Gallon Translucent Tank — ample capacity for single-vehicle service; see fill level without guessing.
- Schrader Valve — pressurize to operating pressure or release safely using any standard tire inflator; no hand pumping.
- Stainless Quick-Connect — mates directly with Motive NPT adapters, pre-lube adapters, and PowerFill adapters; swap adapters tool-free.
- Chemical-Resistant Seals — safe with synthetic and conventional engine oil, ATF, gear lube, and coolant.
Recommended Applications
- Manual transmission and differential gear-oil fills — no more squeeze bottles or hand pumps
- Automatic transmission fluid service via drain-plug or fill-plug adapters
- Transfer-case and limited-slip diff service on trucks and SUVs
- Coolant refills and hydraulic clutch reservoir top-offs
- Engine pre-lube when paired with Motive NPT pre-lube adapters (sold separately)
Which Motive Fluid Transfer Pump Is Right for You?
Motive builds three fluid-handling systems. Pick by job direction and capacity:
| Model | Best for | Capacity | Direction | Pressurization |
|---|---|---|---|---|
| 1735 PowerFill Pro (this product) | Filling gearboxes, diffs & transfer cases on a single vehicle | 1 gallon | Dispenses (pushes fluid in) | Schrader valve – any tire inflator |
| 1745 PowerFill Pro | Multi-vehicle shops & fleet bays; fewer refills | 2 gallons | Dispenses (pushes fluid in) | Hand pump with 0–30 psi gauge |
| 1702 Power Extractor | Removing oil, ATF & brake fluid topside — no lift needed | 2 gallons | Extracts (pulls fluid out) | Manual vacuum pump |
If you need to remove old fluid before refilling, pair the 1735 with the 1702 Power Extractor for a complete drain-and-fill workflow without crawling under the vehicle.
Specifications
- Tank capacity: 1 US gallon (4 quarts), translucent for visible fluid level
- Shutoff: USA-made ball valve at hose end — zero-drip control
- Pressurization: Schrader valve (compressor or hand tire pump)
- Seals: chemical-resistant; compatible with synthetic/conventional oil, ATF, gear lube, coolant
- Connection: stainless quick-connect for Motive NPT and PowerFill adapters (SKUs 1188, 1138, 1144, 1140, 1190)
What's Included
1735 PowerFill Pro 1-gallon tank with ball valve, Schrader valve, quick-connect hose assembly, and wide-mouth filler cap with strainer. Adapters and pre-lube fittings sold separately — see Motive Products SKUs 1188, 1138, 1144, 1140, and 1190. Full directions: PowerFill instructions.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
Original: $92.65
-65%$92.65
$32.43Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
1735 PowerFill Pro – 1-Gallon Fluid Transfer Pump & Pressure Dispenser
The Motive Products 1735 PowerFill Pro is the professional shop standard for pressurized fluid transfer. A USA-made ball valve delivers snap-shut, drip-free control at the hose end; the integrated Schrader valve pressurizes the 1-gallon translucent tank in seconds without shop air; and the stainless quick-connect snaps to Motive NPT adapters for direct fill-plug service on transmissions, differentials, transfer cases, and cooling systems. This listing is for the tank-only configuration — no adapters included.
Key Features
- 1-Gallon Translucent Tank — ample capacity for single-vehicle service; see fill level without guessing.
- Schrader Valve — pressurize to operating pressure or release safely using any standard tire inflator; no hand pumping.
- Stainless Quick-Connect — mates directly with Motive NPT adapters, pre-lube adapters, and PowerFill adapters; swap adapters tool-free.
- Chemical-Resistant Seals — safe with synthetic and conventional engine oil, ATF, gear lube, and coolant.
Recommended Applications
- Manual transmission and differential gear-oil fills — no more squeeze bottles or hand pumps
- Automatic transmission fluid service via drain-plug or fill-plug adapters
- Transfer-case and limited-slip diff service on trucks and SUVs
- Coolant refills and hydraulic clutch reservoir top-offs
- Engine pre-lube when paired with Motive NPT pre-lube adapters (sold separately)
Which Motive Fluid Transfer Pump Is Right for You?
Motive builds three fluid-handling systems. Pick by job direction and capacity:
| Model | Best for | Capacity | Direction | Pressurization |
|---|---|---|---|---|
| 1735 PowerFill Pro (this product) | Filling gearboxes, diffs & transfer cases on a single vehicle | 1 gallon | Dispenses (pushes fluid in) | Schrader valve – any tire inflator |
| 1745 PowerFill Pro | Multi-vehicle shops & fleet bays; fewer refills | 2 gallons | Dispenses (pushes fluid in) | Hand pump with 0–30 psi gauge |
| 1702 Power Extractor | Removing oil, ATF & brake fluid topside — no lift needed | 2 gallons | Extracts (pulls fluid out) | Manual vacuum pump |
If you need to remove old fluid before refilling, pair the 1735 with the 1702 Power Extractor for a complete drain-and-fill workflow without crawling under the vehicle.
Specifications
- Tank capacity: 1 US gallon (4 quarts), translucent for visible fluid level
- Shutoff: USA-made ball valve at hose end — zero-drip control
- Pressurization: Schrader valve (compressor or hand tire pump)
- Seals: chemical-resistant; compatible with synthetic/conventional oil, ATF, gear lube, coolant
- Connection: stainless quick-connect for Motive NPT and PowerFill adapters (SKUs 1188, 1138, 1144, 1140, 1190)
What's Included
1735 PowerFill Pro 1-gallon tank with ball valve, Schrader valve, quick-connect hose assembly, and wide-mouth filler cap with strainer. Adapters and pre-lube fittings sold separately — see Motive Products SKUs 1188, 1138, 1144, 1140, and 1190. Full directions: PowerFill instructions.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
